Olympus SteerROVER, User Manual

Page: 81 / 266

10-004209-01EN [Q7750159], Rev. 2, May 2018
Operation 71
(1) Scan/Rapid button
Used to quickly switch between SteerROVER speeds. The speed in either mode
can be manually set to the user’s preference. Rapid mode also changes the
steering sensitivity according to the user settings.
Fine adjustments of speed can be made in the User Settings screen (see “User Settings
Screen” on page 81“).
(2) Zero button
Sets the current position to zero for all modules.
(3) Module position button[s]
Displays the current position of the SteerROVER and the raster arm. Press to set
the position to any value using the
Edit screen. When a module position is
modified, the position will be modified for all other system modes. When the
right SteerROVER module is connected, the position displayed under
Crawler
refers to the position of the auxiliary idler encoder, which is located between the
drive module’s wheels.
This function only zeroes the number displayed on the SteerROVER handheld
controller. It does not zero the position used in the data acquisition instrument.
(4) Module rate button[s]
Displays the current maximum rate for the selected speed mode. Press to set the
maximum rate using the
Edit screen. The movement commanded by the joysticks
will be limited to the indicated rate. When a rate is modified, the rate will be
modified for all other system modes.
(5) Exit button
Exits Jog mode and returns to the Mode Select screen.
(6) Raster/Steer button
Indicates and selects the function of the right joystick when a raster arm is
present. The right joystick controls either the raster arm position or the
SteerROVER steering.
TIP
NOTE