Olympus SteerROVER, User Manual

Page: 247 / 266

10-004209-01EN [Q7750159], Rev. 2, May 2018
Spare Parts 237
The part number of the vertical probe holder assembly for phased array probe with
standard yoke is Q7750121. The part number of the vertical probe holder assembly for
the TOFD probe with standard yoke is Q7750126. These probe holders are meant to be
used with the pivoting probe holder rack, and they are included with SteerROVER
weld packages (see Table 4 on page 38).
Table 28 Vertical probe holder spare parts and part numbers
ID Part number Description
1 Q8300576 Vertical probe holder subassembly
2 Q7750010 Knurled knob, M4 × 0.7 ×10 mm, 3 mm
stand off, SST
3 Q8300577 Standard arm (A)
Q7750009 Short arm (B)
Q8300578 Long arm (C)
4 U8775198 Pivot button (01), hole size 8 mm
(0.315 in.) for Olympus PA wedge
U8775199 Pivot button (02), hole size 5 mm
(0.197 in.) for Olympus TOFD wedge
5 Q8300579 Standard yoke (S) 6.27 cm (2.470 in.)
Q8300580 Wide yoke (W) 7.78 cm (3.064 in.)
6 Q8300568 Arm clamp screw, SHCS, M4 × 0.7 ×
10 mm, SST
NOTE