10-004209-01EN [Q7750159], Rev. 2, May 2018
Chapter 4
120
4.7
Encoder Cable
Before use, inspect the cable and connectors for damage. When any damage is
evident, the cable must NOT be used. Using a damaged cable may be a safety hazard
and could also put other system components at risk.
The encoder cable connects the SteerROVER system to your instrument. This cable
allows transmission of necessary two axis position signals from the SteerROVER
system to the instrument (see Figure 4-34 on page 120). The encoder cable also
provides 5 VDC from your instrument to the encoder isolation circuitry within the
umbilical breakout housing.
Figure 4
‑
34 Encoder cable
One end of the cable connects to the ENC socket of the power controller and the other
cable end connects to your instrument. The provided encoder cable is compatible with
OmniScan SX, OmniScan MX2, and FOCUS PX instruments.
CAUTION
Summary of Contents for SteerROVER
