10-004209-01EN [Q7750159], Rev. 2, May 2018
System Components
113
Figure 4
‑
29 Power controller
The following list describes the functions of the components of the power controller
using Figure 4-29 on page 113 as a reference.
•
Activate power to the SteerROVER by pressing (and releasing) the green button
(4).
•
The red stop button (5) latches down when pressed; this stop button shuts down
the system. Twist the stop button clockwise to return to the released position. This
must be done before power can be activated.
•
The control cable connects to the CTRL socket (1).
•
The encoder cable connects to the ENC socket (2)
•
The status LCD screen (6) displays the power controller system’s status.
•
Connect the umbilical to the umbilical connection (7) located at the rear of power
supply.
In the event of a break in the stop circuit (the stop circuit runs through the power
controller cable, umbilical, and the SteerROVER’s emergency stop button) power will
shut off.
There are no user serviceable components inside the power controller. Dangerous
voltages can be present inside the case. Do NOT open, or serious human injury could
result. Return it to Olympus for repair.
WARNING
Summary of Contents for SteerROVER
