DMTA-10022-01EN, Rev. C, January 2015
Chapter 6
96
6.7.2.3
Sequential Data File Type
The sequential data file type is similar to the incremental type, although it also allows
you to define both starting and ending ID numbers. The resulting file is inclusive of
the starting and ending points, and all incremental points in between (see the
examples in Table 8 on page 96).
To create a sequential data file
1.
In the measurement screen, press
[FILE]
, and then select
CREATE
a Data File” on page 92 for details on the first parameters).
2.
At the bottom of the
CREATE
screen, select
CONTINUE
.
3.
In the second page of the
CREATE
screen (see Figure 6-19 on page 97):
a)
Enter the
START ID
and
END ID
values.
b)
Select
CREATE
.
Table 8 Resulting ID examples for the SEQUENTIAL file type
START ID
END ID
Resulting IDs
ABC123
ABC135
ABC123
ABC124
ABC125
...
ABC135
XY-GY
XY-IB
XY-GY
XY-GZ
XY-HA
...
XY-IB
Summary of Contents for 45MG
