DMTA-10022-01EN, Rev. C, January 2015
Chapter 9
156
page 156). The displayed thickness is either the minimum, maximum, or current
thickness, depending on which
B-SCAN FREEZE MODE
option is selected. Use
the
[
]
and
[
]
keys to move the review marker and read the thickness at the
review marker location.
If the minimum or maximum value moves off the B-scan screen, press
[FREEZE]
to
center the B-scan and the review marker on the minimum or maximum thickness.
Figure 9-6 B-scan freeze review elements
MAX THK MODE
:
Determines the vertical scale of the B-scan.
9.3.1
Using the B-Scan
The following procedure describes how to activate and use the B-scan.
To use the B-scan
1.
While in the measurement screen, press
[SETUP]
, and then select
B
-
SCAN
.
2.
In the
B
-
SCAN
screen, set
B-SCAN ENABLE
to
ON
, and then configure the other
B-scan parameter as desired (see “B-Scan” on page 153).
3.
Press
[MEAS]
to return to the measurement screen with the B-scan active.
TIP
Review marker
Minimum location
marker
Summary of Contents for 45MG
