DMTA-10022-01EN, Rev. C, January 2015
Chapter 8
146
•
SINGLE CHAR
: Single character command is normally used when an
external program is controlling the instrument by sending remote
commands that mimic keystrokes.
b)
In
OUTPUT FORMAT
, select the format of the data being output (
F1
,
F2
,
F3
,...
F10
).
Contact Olympus for more information on the following communication parameters:
•
Multi and single character remote commands.
•
Send formats (F1, F2, F3, F4, F5, F6, F7, F8, F9, and F10).
c)
Set
B-SCAN OUTPUT
to
ON
to output the B-scan data when communicating
with the GageView interface program. Set it to
OFF
when communicating
with other interface programs that do not support the B-scan data. This
parameter only applies to files that have stored B-scan images.
d)
Set
FTP OUTPUT
to 45MG in order to use the 45MG file protocol.
OR
Set
FTP OUTPUT
to
38DLP
in order to use the 38DL PLUS file protocol.
OR
Set
FTP OUTPUT
to
MG2
to use the MG2 file protocol.
e)
Set
OUTPUT TYPE
to
FTP
for communication with the GageView software
using the standard file transfer protocol.
OR
Set
OUTPUT TYPE
to
CSV
to output in a generic comma-separated variables
(CSV) format, which can be integrated into custom software.
NOTE
Summary of Contents for 45MG
