DMTA-10022-01EN, Rev. C, January 2015
Software User Interface Elements
39
In the remainder of this document, the above procedure is summarized by the simple
instruction to select a specific parameter or list, and its value. For example:
“In the
MEAS
screen, set
MEAS MODE
to
THICKNESS
.”
3.4
Selecting the Text Edit Mode
The 45MG offers two methods of editing the value of alphanumeric parameters.
Either the virtual keyboard or traditional method can be used. The virtual keyboard
appears on the screen to display all the available characters that can be used (see
“Editing Text Parameters Using the Virtual Keyboard” on page 39 for details). With
the traditional method, you must select each character from a hidden list of standard
sorted letters, numbers, and special characters (see “Editing Text Parameters Using
the Traditional Method” on page 41 for details).
To select the text edit mode
1.
In the measurement screen, press
[SETUP]
, and then
select
SYSTEM
.
2.
In the
SYSTEM
screen, highlight
TEXT EDIT MODE
, and then select the desired
mode (
VIRTUAL
or
TRADITIONAL
).
3.
Press
[MEAS]
to return to the measurement screen.
3.4.1
Editing Text Parameters Using the Virtual Keyboard
When
TEXT EDIT MODE
is set to
VIRTUAL
, the virtual keyboard appears when an
alphanumeric parameter is selected (see Figure 3-9 on page 40).
NOTE
Summary of Contents for 45MG
