Olivetti d-COLOR MF3300, Functions And Operating Instructions

Page: 106 / 163

2-28 d-Color MF 3300/3800
Registering a destination 2 2.9
Registering a WebDAV destination
A WebDAV destination can be registered or edited using Web Connection .
In the administrator mode, select [Address] - [Address Book] - [Address Book List] - [New Registration] -
[WebDAV] - [Next], then configure the following settings.
Registering a fax destination
A fax address can be registered or edited using Web Connection .
In the administrator mode, select [Address] - [Address Book] - [Address Book List] - [New Registration] - [Fax]
- [Next], then configure the following settings.
Settings Description
[No.] Destination registration number. If you enter 0, the smallest available number
is automatically assigned. If you want to specify a number, enter the number
within the range of 1 to 2000.
[Name] Enter the destination name (using up to 72 bytes).
[Index] Select a corresponding character so that the destination can be index
searched by registration name.
If the [Main] check box is selected, you can easily specify a destination.
[Host Address] Enter the host name or IP address of the destination WebDAV server.
•
Example of host name entry: "host.example.com"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the name of a destination folder in the WebDAV server specified in [Host
Address] (using up to 142 bytes).
•
Entry example: "scan"
When specifying a folder in the WebDAV folder, insert a symbol, "/", between
the folder names.
•
Entry example: "scan/document"
[User ID] Enter the name of a user who has privileges to access the folder specified in
[File Path] (using ASCII characters of up to 63 bytes).
[Password] Enter the password (using ASCII characters of up to 63 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
[SSL] When SSL is used in your environment, select [On].
[Off] is specified by default.
[Proxy] When a proxy server is used in your environment, select [On].
[Off] is specified by default.
[Port Number] If necessary, change the port number.
Normally, you can use the original port number.
[80] is specified by default.
Settings Description
[No.] Destination registration number. If you enter 0, the smallest available number
is automatically assigned. If you want to specify a number, enter the number
within the range of 1 to 2000.
[Name] Enter the destination name (using up to 72 bytes).
[Index] Select a corresponding character so that the destination can be index
searched by registration name.
If the [Main] check box is selected, you can easily specify a destination.
[Address] Enter the destination fax number (using up to 38 digits, including symbols #, *,
-, T, P, and E).
•
If your environment is Private Branch Exchange (PBX), entering "E-" first in-
serts the registered outside line number automatically.
• If your environment is Private Branch Exchange (PBX), entering "P" follow-
ing the outside line number ensures the dialing.
• If you wish to send out a push signal over the dial line, enter "T".
• Enter "-" to separate a dial number. It does not affect the dialing of the
number.