Olivetti d-COLOR MF3300, Functions And Operating Instructions

Page: 105 / 163

d-Color MF 3300/3800 2-27
2.9 Registering a destination 2
Registering an SMB destination
An FTP destination can be registered or edited using Web Connection .
In the administrator mode, select [Address] - [Address Book] - [Address Book List] - [New Registration] -
[SMB] - [Next], then configure the following settings.
[Password] Enter the password (using ASCII characters of up to 63 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.
[PASV Mode] Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
[On] is specified by default.
[Proxy] When a proxy server is used in your environment, select [On].
[Off] is specified by default.
[Port Number] If necessary, change the port number.
Normally, you can use the original port number.
[21] is specified by default.
Settings Description
Settings Description
[No.] Destination registration number. If you enter 0, the smallest available number
is automatically assigned. If you want to specify a number, enter the number
within the range of 1 to 2000.
[Name] Enter the destination name (using up to 72 bytes).
[Index] Select a corresponding character so that the destination can be index
searched by registration name.
If the [Main] check box is selected, you can easily specify a destination.
[Host Address] Enter the host name or IP address of a destination computer.
•
Example of computer name (host name) entry: "HOME-PC"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the shared folder name of the computer specified in [Host Address] (us-
ing up to 255 bytes).
•
Entry example: "scan"
When specifying a folder in the shared folder, insert a symbol, "\", between
folder names.
•
Entry example: "scan\document"
[User ID] Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 255 bytes).
[Password] Enter the password (using up to 127 bytes).
To enter (change) the password, select the [Change Password] check box,
then enter a new password.