Olivetti d-Color MF220 Copy Operations Download Page 13

Page: 13 / 315

d-Color MF360/280/220 (Version 3)

1-5

1.2

Conventions used in this manual

1.2

Conventions used in this manual

1.2.1

Symbols used in this manual

Symbols are used in this manual to express various types of information.

The following describes each symbol related to correct and safe usage of this machine.

To use this machine safely

WARNING

This symbol indicates that a failure to heed the instructions may lead to death or serious injury.

CAUTION

This symbol indicates that negligence of the instructions may lead to mishandling that may cause injury
or property damage.

NOTICE

This symbol indicates a risk that may result in damage to this machine or originals.
Follow the instructions to avoid property damage.

Procedural instruction

This check mark indicates an option that is required in order to use conditions or functions that are pre-
requisite for a procedure.

This format number "1" represents the first step.

This format number represents the order of serial steps.

This symbol indicates a supplementary explanation of a pro-
cedural instruction.

This symbol indicates transition of the control panel to access a desired menu item.

The symbol indicates a desired page.

The operation proce-
dures are described
using illustrations.

Summary of Contents for d-Color MF220




























































































































































































































































































































Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands

Olivetti d-Color MF220, Copy Operations

Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands