Olivetti d-Color MF220 Copy Operations Download Page 249

Page: 249 / 315

d-Color MF360/280/220 (Version 3)

10-13

10.1

Using an authentication unit (biometric type)

Click [Finish].

Installation of the

Data Administrator Bio Plugin

is completed, which completes the setup.

User registration

To register a user with

Data Administrator

, connect the authentication unit to the USB port of the computer,

and also connect the computer to this machine via network.

If the authentication unit is already connected to this machine, turn the

Main Power Switch

of this ma-

chine off, and then disconnect the authentication unit.

When the authentication unit is already connected to the computer, go to step 4.

NOTICE

To turn the

Main Power Switch

off and on, first turn the

Main Power Switch

off, and then turn it on

after 10 or more seconds has elapsed. Not doing so may result in an operation failure.

When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam-
aged or a failure may occur.

Turn on the

Main Power Switch

of this machine.

Connect the authentication unit to the USB port of the computer that contains

Data Administrator

NOTICE

Do not connect another USB device to the same port as for the authentication unit. Doing so reduces
the USB power supply, resulting in an operation failure.

To use the USB hub, be sure to connect the self-power USB hub that supplies 500 mA or more.

Restart the procedure 5 or more seconds after connecting the authentication unit.

Summary of Contents for d-Color MF220




























































































































































































































































































































Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands

Olivetti d-Color MF220, Copy Operations

Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands