Olivetti d-Color MF220 Copy Operations Download Page 94

Page: 94 / 315

[Application]

5-30

d-Color MF360/280/220 (Version 3)

5.4

Specify finish settings as needed.

Press [Start] or the

Start

key.

5.4.2

[Edit Color]

[Neg./Pos. Reverse]

Use this function to enable the original to be copied with the density and gradations of the image inversed.

The images in the original are copied and output reversed like negative film of photographs.

If a single color is selected, the images are reversed relative to the selected color.

If a background color is selected, colors are reversed relative to the selected base color and the color
of the images.

Press [Application]

[Edit Color]

[Neg./Pos. Reverse].

To cancel the Neg./Pos. Reverse function, press [Neg./Pos. Reverse] again.

Summary of Contents for d-Color MF220




























































































































































































































































































































Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands

Olivetti d-Color MF220, Copy Operations

Search results

Summary of Contents for d-Color MF220

Reviews:

Related manuals for d-Color MF220

Brands by name

Popular brands