Oki ES5112dn, Maintenance Manual

Page: 52 / 128

3-8
3.1.4 System Maintenance Menu (The member of maintenance)
This menu is used for only a member of maintenance, and it is not shown to an
end user.
"SYS MAINTE MENU" enters it by doing hold of a "Back" + "OK" + "Online"
button by push from a Ready state simultaneously more than five seconds.
Enters a password to enter "SYS MAINTE MENU". The default password is
"000000".
System Maintenance menu is displayed only in English. Show a function in the
following.
Category Item Value Default Function / Notes
SYS
MAINTE
MENU A password input screen is
displayed.
SAVE
SYSLOG EXECUTE Save network communication
log(syslog) to flash rom.
PRINT
SYSLOG EXECUTE Print the saved network
communication log(syslog).
CODESET TYPE1
TYPE2 * This menu needs to be displayed
for all brands.
TYPE1: does not display Russian
or Greek.
TYPE2: Display Russian or
Greek
It will be rebooted after existing
from the menu.
TYPE 2 is the default value for
OEL/APS/OEMA brands and
TYPE 1 for other brands.
ADMIN
PASSWORD
RESET EXECUTE Reset the password (aaaaaa) of
Admin Menu.
When the OK switch is pressed,
the following confirmation
message appears.
ARE YOU SURE? YES/NO
When NO is selected, return to
menu.
When YES is selected, execute
to reset.
Category Item Value Default Function / Notes
SYS
MAINTE
MENU FUSE KEEP
MODE EXECUTE It will be ONLINE by pressing
ENTER key which issues the
command from CU to PU.
Check for the operation while
changing the factories supplies
during keeping the power ON.
A new fuse will not cut and
the count-operation will not be
included in the old value).
The check mode will finish and
invalid if turing the power ON.
ENGINE
STATUS EXECUTE Prints engine information.
ENGINE
DIAG MODE Enters self-diagnosis mode of the
engine.
POWER
SAVE ENABLE
DISABLE * Sets Enable/Disable of Power
Save Mode.
Change the transition time to the
energy saving mode by "MENUS"
- "SYSTEM ADJUST" - "POW
SAVE TIME"when Enable is set.
SLEEP ENABLE
DISABLE * Sets Enable/Disable of Sleep
Mode.
Change the transition time to the
energy saving mode by "MENUS"
- "SYSTEM ADJUST" - "SLEEP
TIME"when Enable is set.
CHANGE
PASSWORD NEW
PASSWORD ************ Sets a new password to enter
"System Maintenance" menu
From 6 to 12 digits of number or
Roman character can be enter.
VERIFY
PASSWORD ************ Makes User input the new
password to enter "System
Maintenance" menu which
is set by "New Password" for
confirmation.
From 6 to 12 digits of number or
Roman character can be enter.
3. ADJUSTMENT