④
③
①
⑤
④
⑨
⑩
⑪
⑭
⑦
⑥
⑬
⑫
⑧
②
②
4.2.9 Hopping / MPT / Regist Clutch
(1) Remove the CU-Board. (Refer to 4.2.6)
(2) Remove the Power-Supply Unit ( Board ). (Refer to 4.2.7)
(3) Remove the DC Motor. (Refer to 4.2.8)
(4) Remove the Sheet-Insulation-CU
①
.
(5) Remove the two screws (Silver)
②
,remove the Plate-Base(PWU)-A
③
.
(6) Remove the two screws (Black)
④
,remove the Plate-Clutch-MPT
⑤
.
(7) Remove the MPT Clutch
⑥
and the Gear-MPT
⑦
.
(8) Remove the four screws (Silver)
⑧
,remove Plate-Gear
⑨
.
(9) Remove the Gear-Reduction
⑩
.
(10) Remove the E-ring
⑪
,remove the Regist Clutch
⑫
.
(11) Remove the E-ring
⑬
,remove the Hopping Clutch
⑭
.
(12) Assembling is performed by the inverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
4-12
4. REPLACEMENT OF PARTS
