Closed the Cover Assy Stacker
④
③
②
①
②
⑤
Release lever
⑥
⑦
⑧
4.2.13 Cover Assy Stacker
(1) Remove the Cover-Side-R and Cover–Side-L. (Refer to 4.2.4 / 4.2.5)
(2) Remove the Plate-Shield. (Refer to 4.2.6)
(3) Remove the screw
①
and disconnect FFC cable from board.
(4) Remove the two screws (Silver)
②
. Remove the Cover-Eject
③
and Plate-
Rear
④
.
(At this moment, Head cable is also removed.)
(5) With the Cover Assy Stacker closed, detach Lever-Link-Fuser
⑤
(on both
sides) from the Cover Assy Stacker.
(6) Remove the Cover Assy Stacker
⑥
and two Spring-Torsion-ST
⑦
,
⑧
.
(7) Assembling is performed by the reverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
4-15
4. REPLACEMENT OF PARTS
