①
②
③
④
⑤
⑥
⑦
⑧ ⑨ ⑩
⑩
⑪
⑪
⑫
⑬
①
②
③
③
④
⑤
⑥
⑦
⑧
⑧
Regist Assy
4.2.23 Roller Regist
(1) Separate the Front Assy. (Refer to 4.2.20)
(2) Remove the two screws (Black)
①
and Plate-Feed-B
②
.
(Be careful not to lose the gear that is removed with the plate.)
(3) Remove the Gear-Idle-MPT
③
.Remove the Gear-Reduction-MPT
④
.
(4) Remove the E-ring
⑤
. Remove the Regist-Gear
⑥
.
(5) Remove the Gear-Pressure
⑦
.
(6) Remove the screw (Black)
⑧
. Remove the Plate-Contact-REG
⑨
.
(7) Remove the two screws (Black)
⑩
. Remove the Holder-Regist-L/R
⑪
.
(8) Remove the Roller-Pressure
⑫
. Remove the Roller-Regist
⑬
.
(9) Assembling is performed by the inverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
4.2.24 Roller Feed Assy
(1) Separate the Front Assy. (Refer to 4.2.20)
(2) Remove the two screws (Black)
①
and Plate-Feed-B
②
.
(Be careful not to lose the gear that is removed with the plate.)
(3) Remove the two screws (Black)
③
.
Separate
the Regist Assy.
(4) Remove the two screws (Silver)
④
. Remove the Frame-Hopping-Upper
⑤
(Four claws).
(5) Remove the two Gear-Roller-Feed
⑥
. Remove the two Bush-Feed
⑦
.
(6) Remove the two Roller-Feed-Assy
⑧
.
(7) Assembling is performed by the inverse procedure with removing.
(Note on removing / assembling)
1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
4-25
4. REPLACEMENT OF PARTS
