①
Hook
FFC cable
Holder-Head
①
4.2 Parts replacement procedure
This section describes the procedure for replacing the parts and assemblies shown in the
disassembly diagrams below.
4.2.1 LED Head
(1) Open the Stacker Cover.
(2) Remove the ID UNIT.
(3) Disengage the tab of the Holder-Head from the stacker cover by using a
flat-head screwdriver or something.
(4) Pull the Holder-Head toward you as illustrated below.
(5) Open the Holder-Head by arrow direction and then remove the hook.
remove the LED Assy
①
.
(6) Remove the FFC cable from the connector of LED Assy
①
.
(7) Assembling is performed by the reverse procedure with removing.
Note!
Beware of not to touch or press the Lends of LED Head directly.
4-4
4. REPLACEMENT OF PARTS
