3-19
• Displays are switched by pressing the [MENU
]
key.
DB:k**
DB : Develop voltage setting table ID number [unit: HEX]
•
Displays are switched by pressing the [MENU
]
key.
TR1:k**
TR2:k**
TRl : Transfer voltage parameter VTR1 table ID number [unit: HEX)
TR2 : Transfer voltage parameter VTR2 table ID number [unit: HEX)
•
Displays are switched by pressing the [MENU
]
key.
TROFF:**
TROFF : Transfer OFF voltage setting table ID number [unit: HEX]
5. Repeat steps 2 to 4 as required.
6. Pressing the [CANCEL] key terminates the test. (Returns to the status of step 1.)
3.1.6.6 Consumable item counter display
This self-diagnostic menu is used to display the consumption status of the consumable
items.
1. Enter the self-diagnostic mode (level 1), press the [MENU
] or
[MENU
]
key
repeatedly ,and press the [OK] key when the "CONSUMABLE STATUS" is
displayed in the upper row of the display area. (Pressing the [MENU
]
key
increments the test item and pressing the [MENU
]
key decrements the test
item.)
2. When the [MENU
]
, [MENU
]
key is pressed, consumption statuses of the
consumable items are displayed in order. (Pressing the [ONLINE] or [CANCEL]
key is invalid.)
3. Pressing the [ ] key terminates the test. (Returns to the status of step 1.)
Display area,
upper row
Display area,
lower row
Format
Unit
Details
K-ID UNIT
********IMAGES
DEC
Images
It shows the number of rotations counted
after installation of a new ID UNIT on a
three A4 Pages/Job basis.
K-TONER
********%
DEC
%
It shows the amount of toner consumption.
K-STC
MODE CNT
*********8192
DEC
DOT
It shows the number of print dot counts of
the toner.
(It is a cumulative value counted after the
first use of the printer.)
K OVER
RIDE CNT
********TIMES
DEC
Times
It shows the number of overrides of life
warnings for the toner cartridge.
3. ADJUSTMENT
