3-17
3.1.6.5 Test print
This self-diagnostic menu is used to print the test pattern that is built inside PU. Other test
patterns are stored in the controller.
This test print cannot be used to check the print quality.
Diagnosis for the abnormal print image should be performed in accordance with section 2.
1. Enter the self-diagnostic mode (level 1), press the [MENU
] or
[MENU
]
key
repeatedly ,and press the [OK] key when the "TEST PRINT" is displayed in the
upper row of the display area. (Pressing the [MENU
]
key increments the test
item and pressing the [MENU
]
key decrements the test item.)
2. The setting items that can be applied to the test print only is displayed in the
lower row of display area. Keep pressing the [MENU
]
, [MENU
]
key until the
desired menu item is displayed. (Pressing the [MENU
]
key increments the
test item and pressing the [MENU
]
key decrements the test item.) (If all setting
items need no entry [Default setting], go to step 5.)
3. Keep pressing the [MENU
]
, [MENU
]
key, and press the [OK] key at the menu
item set by step 2. Then, the setting item is displayed in the upper row of display
area, and the setting value is displayed in the lower row of display area.
Pressing the [MENU
]
key increments the setting value. Pressing the [MENU
]
key decrements the setting value. (The setting value that is displayed at last is
applied.) Pressing the [ ] key determines the entry value, and returns to step 2.
Repeat step 3 as required.
TEST PATTERN
1
Display
Setting value
Function
PRINT EXECUTE –
Pressing the [OK] key starts print/Pressing the
CANCEL key terminates print. (In units of page)
TEST PATTERN
0
0: White paper print
1~7: Refer to next page. (Pattern print)
8~15: White paper print
TEST CASSETTE TRAY1
Selecting source of paper supply.
If the TRAY 2 is not installed, TRAY2 is not displayed.
TRAY2
MPT
PAGE
0000
Setting number of the test print copies
DUPLEX
OFF
Selecting OFF for duplex (2-sided) print.
Duplex (1-sided) print is performed by the stack of
one sheet of paper.
1 PAGES STACK
•
is the initial default value. The menu item that is set here is valid in this menu
item only.
(The setting item is not saved in EEPROM.)
Note!
PAGE setting
Pressing the [MENU
]
key or the [MENU
]
key shifts the digit. Pressing
the [ONLINE] key increments the setting value. Pressing the [MENU
]
key increments the setting value. If print is executed while the number of
print copies remains in "0000", printing will continue infinitely.
Print setting for each color
Pressing the [MENU ] key or the [MENU ] key shifts the setting.
Pressing the [ONLINE] key or the CANCEL, the ON/OFF switchover will
be set. Pressing the [ ] key returns the panel display.
3. ADJUSTMENT
