Scan to E-mail: Administrator Setup
140
CX3641 Advanced Technical User Guide
Scan to SMB
Enables or disables the
SMB
function. When
enabled
,
users can scan files and send them to a client PC; when
disabled
this function cannot be used.
Proxy
Settings
Define the following Proxy Server settings (a proxy server
forwards requests to other servers):
•
Server Name
: Set the FTP proxy server name or IP
address.
•
User Name
: Set the user name for the proxy server.
•
Port Number
: Set the port number of the proxy
server.
LDAP
Settings
Define the following LDAP settings:
•
Server Name
: Set the LDAP server name or IP
address.
•
Port Number
: Set the LDAP port number.
•
Timeout
: Sets the timeout in seconds for the search
(from 10–120 seconds).
•
Max. Entries
: Sets the maximum number of E-Mail
addresses that the CX3641 can receive in each search.
The clear button resets this value to the default.
•
Search Root
: Set the root DN (Distinguished Name).
•
Attributes
: Specify the LDAP attribute corresponding
to “Name”, “Surname”, “First Name”, and “Mail
Address”. The specified attributes are used to query.
The default attributes are:
“cn” for “Name”
“sn” for “Surname”
“givenname” for “First Name”
“mail” for “Mail Address”
•
Additional Filter
: Specify the additional filter. For
example, “(c=JP)”.
•
Authentication
: Specify the authentication method
for LDAP access:
“Anonymous”: No authentication
“Simple”: ID & password authentication. They are sent
in plain format. “User ID” and “Password” can be set
here in advance, or left blank. If they are not set here,
user should set them when E-Mail address search by
LDAP is carried out.
“Secure Protocol”: Authentication method for MS
Active Directory. “User ID”, “Password” and “Domain”
can be set here in advance, or left blank. If they are
not set here, user should set them when E-Mail
address search by LDAP is carried out.
TABLE 8-11.
Administrator Parameters
Parameter Explanation