Oki CX 1145 MFP Operator'S Manual For Basic Function Download

Page: 93 / 341

3.SETTING BASIC COPY MODES

4.Selecting Finishing Modes (Cont.)

Hole punch mode (optional)

When the Hole Punch Unit (optional) is installed to the finisher (optional), you can punch holes in the cop-
ies.
•

The available copy paper sizes for this mode are LD, LG, LT, LT-R and COMP.

•

The paper weight applicable for this mode is 17 lb. Bond to 110 lb. Index.

•

Special paper such as OHP films or sticker label cannot be used for hole punching.

Place paper in the drawer(s).

• When using this mode in bypass copying, specify the paper size in advance. (

P.58 “3.Bypass Copying”)

Place the original(s).

Press the finisher button on the basic menu.

Press the [HOLE PUNCH] button.

• Set other copy modes as required.

Press the [START] button.

Summary of Contents for CX 1145 MFP






















































































































































































































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, Operator'S Manual For Basic Function

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands