Oki CX 1145 MFP Operator'S Manual For Basic Function Download

Page: 75 / 341

3.SETTING BASIC COPY MODES

1.Paper Selection (Cont.)

Select either automatic paper selection (APS) or automatic magnifica-
tion selection (AMS).

Automatic paper selection:

Copies on the same size of paper as that of originals (

P.71).

Automatic magnification selection:

Copies all in one size (

P.77).

• Before you use automatic paper selection, be sure that all paper sizes corresponding to the original sizes have

been set in the drawers.

• In automatic magnification selection, the copies cannot be enlarged from LT (portrait) to LD (landscape)/LG

(landscape).

• If “Change direction of original” appears when [AMS] is used with [MIXED ORIGINAL SIZES], change the

direction according to the message.

• Set other copy modes as required.

Press the [START] button.

Summary of Contents for CX 1145 MFP






















































































































































































































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, Operator'S Manual For Basic Function

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands