2-2. Display & Condition Indicating LAMP
1
2
3
4
5
VFD
OCP
If selected output port is OCP setting
will be lighted
OVP
CC
If selected output port is OVP setting, will be lighted.
CV
If selected output port is Constant Voltage Mode, will be lighted.
If selected output port is Constant Current Mode, will be lighted.
Voltage/Current & Message Display Module
5
7
8
OCP
If selected output port is OCP setting, will be lighted.
TRK
It will be lighted when output channels are Tracking Mode.
It will be lighted when output channels are Parallel Mode.
RMT
6
It will be lighted in Remote Interface condition, and by pressing
I/O Config/Local Key, It will move on to Local Mode.
PAR
When the power is ON, every lamp will be lighted for 300ms.
Note
- 18 -
