▷ DISABLE
Disables Tracking function.
Error will occur when command is received from Remote Controller.
For more information about the error, please check “7.Error Messages”
Instructions
Instructions
▌Power Switch ON while pressing FACTORY Key.
▌
When
"
1. OUTPUT MODE
" is displayed, release FACTORY Key.
▌Use cursor key to find menu.
VFD Display Description
2. track-key
▌To enter the menu, press FACTORY Key.
Previous condition
VFD Display Description
will be displayed.
▌To de-activate, press cursor key once.
VFD Display Description
▌
h
d d
i i
AC O Y K
enable
disable
▌To save changed description, press FACTORY Key once.
VFD Display Description
▌Saved set-up will be applied from next power ON.
▌To make Enable Mode, follow above steps.
done
5-5. PARALLEL-KEY
▌Function which enables & disables Parallel Mode when key is pressed.
▌It protects from entering Parallel Mode while using several Power Modules.
▌It will maintain the setting until it is changed.
Set-Up Description
▷ ENABLE
It enables the parallel mode.
▷ DISABLE
It disables the parallel mode.
Error will occur when command is received from Remote Controller.
For more information about the error, please check “7.Error Messages”
- 56 -
