2-1. Front-Panel Voltage Current Setting
Read below description to change Limit Setting Value of Voltage and Current.
1. After power ON, check "P1-OUTPUT OFF" is displayed on VFD.
2. To select output channel, press Key to move on to the channel.
3. Press V/I & LMT DISPLAY Key to move on to Limit Mode.
4. Press Key to select Voltage and Current.
5. To increase or decrease the value, press or to move digit location.
6. To increase the Limit value, rotate encoder switch clockwise.
To decrease, rotate encoder switch anti-clockwise.
7. Check whether the value is changed on VFD Display.
8 T
i t
tti
v lt
& u
t
OUTPUT ON/OFF KEY
8. To print setting voltage & current, press OUTPUT ON/OFF KEY.
If an error occurred while『Self-test』, press button to check.
Read "7. Error Messages" for more information about Error Code.
Note1
If user press V/I & LMT DISPLAY KEY, "P1-OUTPUT OFF" message will be disappeared, and moves
on to limit display condition. If there is no command until 5seconds, it will return to page
"P1-OUTPUT OFF".
Note2
If it is Remote Interface condition, Front Panel Keys and encoder switch will not work.
After quitting Remote Interface, press key to return to Local condition.
Note3
- 17 -
