3-11. ERROR
Errors found while self-testing, error related to Calibration, SCPI program error will be saved in
fixed memory up to 10.
Read "7. Error Messages" for more information.
▌ERROR memory is stack structure, and latest error will be accessed.
▌It
ill b
d
i
10 f
11 th fi t
ill b d l t d
▌It will be saved maximum 10, from 11 the first message will be deleted.
▌Press ERROR Key to check, and delete from the stack.
▌There will be an alarm when an ERROR occurs.
ERROR Check
▌Power Switch ON
▌
After Power ON, check whether "
P1 - OUTPUT OFF
" is displayed.
▌To check ERROR, press ERROR Key.
If there is no Error, display description will same as below, and
return to previous condition after few seconds.
VFD Display Description
If there is an Error error code will be displayed
NO ERROR
If there is an Error, error code will be displayed.
VFD Display Description
▌To check next ERROR, press ERROR Key.
If there is an Error, error code will be displayed.
VFD Display Description
▌T
h
k
t
d
ERROR K
ERROR NO, -200
ERROR NO, -10
▌To check next error code, press ERROR Key.
≫ Related Remote Interface Command
SYSTem:ERRor?
Refer: Check Error
SYST:ERR? Return value :-222,"Out of data"
SYST ERR? Return value 222, Out of data
Check Error code and description
1. In front panel, can only check error code. While remote interface, user can check also the
description.
Note
2. What is Stack Memory? It is a FILO(First In Last Out) structure, which means when the
box is fully filled, first item must be taken out.
- 43 -
