GPIB Installation Set-Up
GPIB connector is 24pin standard, and located at the rear panel of power supply.
GPIB is Optional.
< Diagram 3-5 >
▌GPIB PC Interface Installation
To connect the equipment, cables should be protected and shorter than 2M.
Also, total length should not be longer than 20M.
Do not connect more than 15 devices (Including PC).
IEEE488 2 Connector block should not be more than 3 piece
IEEE488.2 Connector block should not be more than 3 piece.
<A>
<B>
or
< Diagram 3-6 >
< Diagram 3-7 >
When connecting cable is longer than 4M, please check IEEE488.2 warning.
Note
- 39 -
