6. SCPI Commands
User could control using SCPI(Standard Commans for Programmable Instruments) commands.
By using GPIB, several power supply & measuring instruments can be connected.
It will be adequate users who are using many instruments.
6-1. Commands Syntax
▌Capital/small letters can be skipped.
▌Capital/small letters both can be used.
▌Only one command will be affected.
▌Rectangle bracket([ ]) is an option or parameters and can be skipped.
▌Parameters in Braces({ }) cannot be skipped.
▌Parameters in Braces({ }) cannot be skipped.
▌Triangle Bracket(< >) can be change as a CODE (EX: MIN,MAX).
▌Separating Bar( | ) indicates two or more parameters.
6-2. Commands
INSTrument[:SELect]{OUT1|OUT2|OUT3|. . . |OUT255}
INST
t[ SEL
t]?
Channel Select Commands
INSTrument[:SELect]?
APPLy{<voltage>}[,<current>]
APPLy?
[SOURce:]VOLTage{<voltage>|UP|DOWN}
VOLTage?
Output Setting Commands
VOLTage?
VOLTage:STEP{<numeric value>}
VOLTage:STEP?
VOLTage:PROTection{<voltage>}
VOLTage:PROTection?
VOLTage:PROTection:STATe {0|1|OFF|ON}
VOLTage:PROTection:STAT?
VOLTage:PROTection:TRIPped?
VOLT
PROT
ti
CLE
VOLTage:PROTection:CLEar
CURRent{<current>|UP|DOWN}
CURRent?
CURRent:STEP{<numeric value>}
CURRent:SETP?
CURRent:PROTection{<current>}
CURRent:PROTection?
CURRent:PROTection:STATe {0|1|OFF|ON}
CURRent:PROTection:STAT?
- 64 -
