DIAM4200 ©2018 AUGIER SA.
6021642 DIAM4200 5 to 20KVA rev 1-8.docx
I-21
I.5
OPERATION
The “Parameter Access” function must be activated before changing parameters, in order to
avoid unwanted changes.
Pressing the
menu
touch, the display shows:
then scroll through the top-
level menu items using the and keys. When the “
Options
” item is shown
like:
press
OK
to go into the “
Options
” menu, then scroll through the items until the “
Param. access: NO”
item is
displayed:
Press
modif
in order to modify the parameter. When the "
NO
" displayed blinks, it is possible to change the
parameter : press
<
or
>
to in order to change “
NO
” to “
YES
” :
Save the modification by pressing
OK
.
Press
esc
twice to go back to the initial state.
ALL PARAMETERS ARE MODIFIED USING THE SAME PROCEDURE.
Monitoring
esc
OK
Options
esc
OK
Param. access: No
esc
modif
Param. access: Yes
esc
OK