DIAM4200 ©2018 AUGIER SA.
6021642 DIAM4200 5 to 20KVA rev 1-8.docx
I-4
SAFETY
Safety precautions
This equipment is normally used or connected to circuits that may employ dangerous and lethal voltages.
Extreme caution should be exercised by operating or maintenance people when working on or with this
equipment.
See IEC 61820 & 61821 standard (CCR type IEC), or FAA AC150/5340-26 advisory circular (CCR type FAA),
concerning safety rules and precautions. While practical safety precautions have been incorporated in this
equipment, the following rules must be strictly observed :
•
KEEP AWAY FROM LIVE CIRCUITS
:
Operating and maintenance people must at all time observe all safety regulations. Do not change
components nor perform maintenance inside equipment with power ON or the lighting loop energised.
•
RESUSCITATION
:
Operating and maintenance personnel should familiarise and keep themselves trained with resuscitation
techniques found in widely published manuals about first aid instructions.
•
ELECTROSTATIC DISCHARGE (ESD)
:
Electronic sub-assemblies and boards should be touched only for unavoidable operation (replacement,
for example). Before to operate, maintenance people must first of all eliminate unwanted electronic
charges, discharging his own body while touching a conductive earthed object or part. Electronic boards
and components as power semiconductors must be stored and carried an conductive packing.
•
DESTRUCTION
:
In case of dismantling, scrapping or placing out of service, the user must follow all the required
precautions for component, materials or equipment elimination, according the local rules.
EEC DIRECTIVES
This equipment complies with the requirements of EC directives :
•
89/336/EEC, 92/31/EEC and 93/68/EEC with regard of Electromagnetic
Compatibility
•
73/23/EEC with regard of Low Voltage Equipment
