DIAM4200 ©2018 AUGIER SA.
6021642 DIAM4200 5 to 20KVA rev 1-8.docx
I-3
WARRANTIES
Guarantee
AUGIER’s goods has been manufactured and will perform in accordance with applicable specifications, and
any defect in design, materials or workmanship which may occur during proper and normal use during a period
of 1 year from date of installation or 2 years from date of shipment will be corrected by repair or replacement by
the manufacturers f.o.b factory.
The guarantee covers repair, modification or replacement of parts or products recognised to be defective, in
the shortest possible time, at AUGIER’s cost, provided always that the goods have been properly handled and
stored prior installation, properly installed and properly operated after installation.
Unless otherwise specifically laid down in contract, the guarantee does not cover:
•
Costs of consignment to factory and re-consignment of defective goods to Buyer
•
Travelling & sojourn expenses of AUGIER’s personnel if goods have to be repaired on site; assembly
and dismantling of any goods other than those recognised to be defective; expenses incurred for
waiting times by AUGIER’s personnel on site for reasons independent of their will;
•
Unjustified travel expenses.
Guarantee shall not apply in the following cases:
•
Defects in materials supplied by Buyer or from any designs imposed by them;
•
Repairs or replacements due to normal wear and tear, or damages or accidents.
•
Repairs or replacements due to damages or accidents resulting from negligence or lack of due care,
inadequate supervision or maintenance, or erroneous use of the equipment or software;
•
Any other causes for which AUGIER shall not be held responsible, e.g. resulting from an case of Force
Majeure.
•
When Buyer has replaced AUGIER’s parts with other parts.
Buyer must inform AUGIER in writing and without delay of any defects in goods, giving all necessary
information and detailed description of how equipment has been utilised, together with purchase date. Buyer
undertakes not to have repairs carried out by third parties; any repairs carried out without AUGIER’s express
prior agreement shall invalidate the guarantee.
It is expressly agreed between the two parties that Buyer cannot avail himself of the beneficial dispositions
contained in the guarantee without having first satisfied payment conditions laid down in contract
Disclaimers
This manual could contain technical or typographical errors. AUGIER reserves the right to make changes and
revise this manual from time to time without obligation to notify any person or organisation of such changes or
revision.
Values and measurements given in this manual are average values and are not binding. AUGIER disclaims any
liability for damages suffered as a result of reliance on the information given in this manual, or the use of
equipment or processes which this manual refers.
No guarantee is made that the use of the products, equipment, processes or information to which this manual
refers will not infringe any third party’s patent or rights. Information given does not release the buyer from
making their own tests.
