Dinámico directo /
Dynamic live
Módulo Artnet
/ Artnet module
LB-ART2
Lluria se reserva el derecho de modificar las especificaciones.
Lluria reserves the right to modify specifications.
1/2
v.2019.01
Módulo basado en el ptrotocolo Artnet para
controlar LEDs con señal SPI sin necesidad de
equipos adicionales.
Permite controlar la instalación en directo.
La conexión se realiza a través de Ethernet.
Dispone de 2 puertos.
Module based on the Artnet protocol to control
LEDs with SPI signal wothout the need for
additional equipment.
It allows to control the live installation.
The connection is made through Ethernet.
It has 2 ports.
Características técnicas
/
Technical data
IP
20
Voltaje entrada
/
Input voltage
DC 5V - 24V
USB
USB 2.0, type B port
Salida data
/
Data output
8 x 512 canales SPI
Ethernet
2x RJ45, Auto MDI-X, 10/100 MBit/s
Medidas
/
Dimensions
Temperatura almacenamiento
/
Storage temperature
92 x 70 x 45 mm
-20~85ºC
Puertos
/
Ports
2
LEDs
APA101, APA102, APA104, APA106,
GS8207, GW6201, GW6205,
LPD1882S, LPD6803, LPD8806,
MBI6120, P9883, SJ1221, SK6812,
SK6822, SM16703, SM16716,
TLS3001, TLS3008, TM1804,
TM1809, TM1812, TM1814, TM1829,
UCS1903, UCS2903, UCS512B3,
UCS8904, UCS9812S, WS2801,
WS2803, WS2811, WS2811S,
WS2812, WS2812B, WS2813,
WS2815, WS2818, WS2822S,
WS2822S Addressing
Temperatura funcionamiento
/
Operating temperature
-10~70ºC
SPI Converter & Direct Connection
Directly connect to a wide range of supported LEDs via two 4-pin
screw terminals. A signal frequency of up to 24 MHz is available.
Supply power over USB or 5 V to 24 V over a 2-pin screw terminal.
Art-Net / Streaming ACN / USB
Network data is directly converted to SPI without the need for
an additional interface. Reliably distribute data from any compatible
software or hardware controller. In addition, simply connect
to the MADRIX
®
Software over USB.
Supported LEDs
Additional LED types will be supported with future firmware updates.
Quality Output Of 8 Universes
Each device drives up to 1,360 RGB pixels while ensuring responsive
delivery of high-quality signals to each individual LED. You can choose
the output protocol separately for each of the two ports.
Sync Mode & Daisy-Chain Support
MADRIX
®
Software and hardware allow you to fully synchronize
Art-Net data for all ports and across devices to get an optimal image
on the LEDs without visual interruptions. 2 Ethernet ports allow
linearly daisy-chaining several devices together.
Designed For DIN Rails Or Walls
Its non-conductive enclosure and standardized design for 35 mm
top-hat rails make mounting quick, easy, and safe. 2 extra brackets
are provided for optional wall mounting. 9 indicators quickly show
the device status with the option to turn them off.
Invaluable Features
The device is ready within seconds after startup.
HTP merging is automatically available for two Ethernet sources.
Its firmware is upgradable. Access and change specific device settings
using the built-in web configuration page.
Package Contents
MADRIX
®
NEBULA
Set of screw terminals (2x 4-pin and 1x 2-pin)
USB 2.0 cable (certified)
2x Wall-mount brackets
Quick start guide / technical manual
© 2001 – 2019 inoage GmbH | MADRIX
®
is a registered trademark | [email protected] | www.madrix.com
MADRIX NEBULA
The flexible pixel tape driver
to directly control
a wide range of digital LEDs.
Key Features
4
th
Edition – 05/2019
The MADRIX
®
NEBULA directly connects to your LED pixels.
This advanced SPI decoder receives control data over Ethernet network or USB and is built to provide excellent image quality.
APA101
P9883
TM1814
WS2812
APA102
SJ1221
TM1829
WS2812B
APA104
SK6812
UCS1903
WS2813
APA106
SK6822
UCS2903
WS2815
GS8207
SM16703
UCS512B3
WS2818
GW6201
SM16716
UCS8904
WS2822S
GW6205
TLS3001
UCS9812S
WS2822S
LPD1882S
TLS3008
WS2801
Addressing
LPD6803
TM1804
WS2803
LPD8806
TM1809
WS2811
MBI6120
TM1812
WS2811S
More Information
Find all the latest user manuals, drivers, firmware updates,
and more at www.madrix.com
(compatible with 1 GBit/s)
