![background image](http://html1.mh-extra.com/html/datakom/dkg-108/dkg-108_user-manual_3680107001.webp)
DKG-108 User Manual V-1.0
(10.08.2011)
-1-
DKG-108 POWER
FACTOR CONTROLLER
8 BANKS, HARMONIC
DISTORTION DISPLAY
Small size
Cost effective and high performance
True RMS AC measurements,high accuracy
4096 samples/sec measurement rate
Easy commissioningthrough automatic setup
Automatic CT reverse polarity correction
Automatic detection of faulty banks
Electronic/mechanical power counter selection
Per-phase regulation capability
Supports both single-phase and triphasebanks
Connection/disconnection of all banks at once
Adjustable delay timers
Dynamic update of capacitor ratings
Equal aging of contactors
Per phase and total V-A-kW-kVAr-cosdisplay
THD display of all V-I parameters (31 harmonic)
Generator phase input
VT ratio for MV applications
kW and kVAr tick output possibility
Front panel programmable
Low panel depth, easy installation
Wide temperature range
Sealed front panel (IP54)
Plug-in connection system for easy replacement
DFC-0108 is a high technology controller
allowing the power factor of the installation to
be stabilized to the requested value by
switching capacitor banks through
contactors. The unit allows also the
visualization of various AC parameters like a
network analyzer.
The unit makes harmonic analysis up to the
31th component. The THD values of all
voltages and currents are available.
Stepping algorithms are selectable between
various types. Thanks to the automatic setup
function, the commissioning and
programming are made easy.
The unit fits into a standard 96x96mm panel
opening.
DESCRIPTION
FEATURES