Oce VarioPrint 2090, User Manual

Page: 28 / 187

28 Océ VarioPrint 2090 User manual
Sleep mode
When the system is in sleep mode, the power consumption is decreased to a
very low level.
The operator panel on the printer is off. The On/Off button
on the printer
is amber.
The system goes in the sleep mode in the following situations.
[5] System goes into the sleep mode
[5] System goes into the sleep mode
The system returns from the sleep mode in the following situations.
[6] System returns from the sleep mode
[6] System returns from the sleep mode
Note:
The system needs a couple of minutes to warm up.
When
1 The Océ VarioPrint 2090 is not used for a defined time
Note:
This time is defined in the Océ Settings Editor. The key
operator can set a time between 1 and 240 minutes in steps of 1
minute. The factory default is 90 minutes.
2 You press the On/Off button on the printer
When
1 You press the On/Off button on the printer
2 An automatic print job (AP) arrives in the job queue.
Sometimes the system remains in the sleep mode when you send
an automatic print job. This event occurs in the following
situations.
■
A PIN code protects the sleep mode
■
The automatic print job is forced to the mailbox (defined in the
Océ Settings Editor)
3 You send a print job (only when the setting 'Automatic wake-up' in
the Océ Settings Editor is enabled)