Oce VarioPrint 2090, User Manual

Page: 169 / 187

Error handling 169
About the staple jams
Introduction
Information for operators, key operators
All the staplers can staple sets of 80 sheets of paper and sets of a maximum
of 8.25 mm. The number of 80 sheets was defined with Océ Red Label paper
of 80 g/m
2
(20 lb bond). When a staple error occurs, the operator panel shows
a message. Follow the instructions on the screen to correct the problem.
General information
When a stapler error occurs, replace the stapler cartridge (see ‘Add the staples’
on page 156).
Remove any loose staples. Make sure that no staples fall into the Océ
VarioPrint 2090 . Keep the stapler cartridge which caused the problems. Give
the stapler cartridge to the Océ service technician.
Note:
After you correct the problem, the situation can occur that the stapler
does not staple the next two or three sets.