Oce VarioPrint 2090, User Manual

Page: 85 / 187

The print function 85
Change the settings in the 'Paper' section
1
Press the function key 'Paper'.
[22] The 'Paper' section
[22] The 'Paper' section
2
Press the function key 'Paper' to select the paper tray for the print job.
3
Press the function key 'Covers' to define the use of covers.
Change the settings in the 'Layout' section
1
Press the function key 'Layout'.
[23] The 'Layout' section
[23] The 'Layout' section
2
Press the function key 'Print document type'.
You can set the binding edge of the print. This setting defines if the document
flips over the long edge or the short edge of a sheet. This setting also allows
you to select the orientation of the print. You can select landscape or portrait.
You can only set 1 staple for documents that flip over the short edge of a sheet.
Note:
The 'Original document type' section displays an indication of how the
information is oriented on the original, in landscape or portrait direction. You
can not change this information for a print job.