Oce VarioPrint 2090, User Manual

Page: 101 / 187

The copy function 101
[28] Graphical information
The settings in the 'Basic' section
[32] The 'Basic' section
[32] The 'Basic' section
The following table describes the settings.
[29] The settings in the 'Basic' section
[29] The settings in the 'Basic' section
Note:
The settings of the 'Basic' section for a copy job are not the same as the
settings of the 'Basic' section for a print job. The 'Basic' section for a print job
has less options (see ‘Edit a mailbox job’ on page 83).
6 Document size (variable for copy jobs only)
7 Margin shift
8 Subset number (for copy jobs only)
9 Number of copies
Settings Description
'Original' The setting describes if the originals must be scanned '1-sided' or
'2-sided'.
'Copy' This setting describes if the copies must be '1-sided' or '2-sided'.
'Staple' This setting allows you to set the number of staples. You can set
0, 1 or 2 staples.
Note:
The position of 1 staple depends on the selected original
document type (landscape stapling possible).
'Zoom' The setting has the following options.
■
'Automatic'. This function resizes the information on the
original to fit on a copy with a different paper size. The
automatic function uses fixed conversion values.
■
Manual setting. The zoom range is between 25% and 400%.
Number Graphical information