Oce VarioPrint 2090, User Manual

Page: 104 / 187

104 Océ VarioPrint 2090 User manual
[31] The settings in the 'Layout' section
'Layout' The setting allows you to print more than 1 image on a
sheet.
You have the following options.
■
'Booklet'
The system prints 2 images per sheet. The system
automatically prints your job 2-sided. The system
shuffles the pages so that a booklet is created when
you fold the copies.
■
'2-up'
The system prints 2 images per sheet. When you
select '1-sided', the next 2 images are printed on a new
sheet. When you select '2-sided', the next 2 images are
printed on the rear of the sheet.
■
'Normal'
Your job is copied with no special layout settings.
Note:
When you select 'Booklet' or '2-up' the system
copies the images, when possible, 1:1. For example,
when you copy A4 originals, the images are printed on
A3.
'Copy document
type' The setting allows you to select the binding edge of the
copies. A figure at the left-hand side of the operator
panel displays the result after you select a value for a
particular binding edge.
You have the following options.
■
The portrait copy turns on the long edge.
■
The landscape copy turns on the short edge.
■
The portrait copy turns on the short edge.
■
The landscape copy turns on the long edge.
Note:
It can occur that the original document type and
the copy document type that you select, have a different
content orientation. For example, the original is a
portrait document and the copy is a landscape
document. When this situation occurs, the system resizes
the information on the portrait original to fit on the
landscape copy.
Settings Description