Oce VarioPrint 2090, User Manual

Page: 17 / 187

Introduction 17
Behaviour of the output trays
The key operator can define the deposit behaviour of the output trays in the Océ
Settings Editor.
■
Deliver the output from top to bottom.
The print jobs are delivered to the output trays in a top to bottom manner.
The print jobs are first sent to the highest ouput tray. When the first output
tray is full, the print jobs are sent to the next tray below. This behaviour
continues untill all the print jobs are delivered.
This option can be preferred in a central environment. The capacity of the
output trays is used in an optimal way. The system remains productive as
long as possible without the intervention of an operator.
■
Deliver the output bottom up.
The Océ VarioPrint 2090 sends the print jobs to the first output tray located
above the bulk tray. If this output tray is full, the Océ VarioPrint 2090 sends
the print jobs in a bottom up manner to the next output tray located above
the tray that is full. This behaviour continues until the highest output tray is
also full. When the three highest trays are full, the print jobs are sent to the
lowest tray, which is the bulk tray.
This option can be preferred in a decentral environment. The output is
delivered in a more logical order. The documents are sorted in the order in
which they were produced. The documents are put face down into the
output trays. The user can find the documents quicker and easier.