Oce VarioPrint 2050-70, Job Manual

Page: 158 / 174

158 Océ VarioPrint 2050-70 Job manual
Features
The E
NERGY
S
TAR
® Criteria involve following features.
■
Two energy save modes:
Low power mode
The Océ VarioPrint 2050-70 enters automatically the low power mode 15
minutes after completion of the last job. The Key operator can adjust the low
power mode default time (1-15 minutes).
Sleep mode
The Océ VarioPrint 2050-70 enters automatically the sleep mode 90
minutes after completion of the last job. The Key operator can adjust the
sleep mode default time (10-90 minutes).
If the above mentioned default times for the low power mode (15 minutes)
or sleep mode (90 minutes) cause inconvenience, you can request the
service technician to increase the limit to a maximum of 240 minutes. It is
suggested to determine the appropriate default times for your work pattern
by changing the setting in steps of 30 minutes and testing each setting for at
least a week. Only if the sleep mode default time limit of 240 minutes still
causes sizable inconvenience, due to your particular work pattern, can you
request the service technician to add a setting to the system, which allows
the Key operator to disable the sleep mode.
■
Automatic duplex
Using both sides of paper reduces paper costs, national energy consumption
and the amount of paper in the waste disposal process. Therefore, the Océ
VarioPrint 2050-70 is default set for automatic duplex copying and printing.
■
Recycled paper
The use of recycled paper also benefits the environment. The Océ
VarioPrint 2050-70 is designed to use recycled paper. Product literature on
recommended types of recycled copier / printer paper can be obtained from
your local Océ company or Océ Headquarters (Océ-Technologies B.V.) in
Venlo, the Netherlands.
E
NERGY
S
TAR
®
is a U.S. registered mark.