Oce VarioPrint 2050-70, Job Manual

Page: 43 / 174

The copy function 43
Common copy jobs
Copy one set of originals
Introduction
The automatic document feeder provides a rapid method to copy a set of
copies that is identical to the originals.
When you place the originals in the automatic document feeder, the Océ
VarioPrint 2050-70 performs as follows.
■
Detects the dimensions and the feed direction of the originals.
■
Matches the detected information to the copy settings.
■
Selects the tray that holds paper of the correct size.
■
Shows the selected size, in the 'Paper' section.
When you use the platen to copy A5 or A3 originals, you must select the
required paper.
The Océ VarioPrint 2050-70 selects the tray that matches the required paper
size of the copies. If the paper orientation in this tray does not match the feed
direction of the originals, the Océ VarioPrint 2050-70 rotates the image 90°.
The rotation symbol
is shown in the 'Extra' section name box.
Press the Start key , to start your copy job.
Before you begin
■
The Key operator can protect the access to the system, so that a credit card
or a PIN can be required to enter the 'Copy' mode (see ‘
Access the Océ
VarioPrint 2050-70 ’ on page 25 ).
■
Inspect your originals and make sure that all originals are standard. You can
use the automatic document feeder for those originals. If one or more
originals are non-standard, you must use the platen (see ‘
Prepare the copy
job ’ on page 32 ).
■
If the originals are different sizes and types, sort the set of originals into
separate job parts (see ‘
Prepare the copy job ’ on page 32 ).