Oce VarioPrint 2050-70, Job Manual

Page: 127 / 174

The scan function 127
Stop or correct a scan job
Introduction
A scan job has the following phases (see ‘ Scan jobs in this manual ’ on
page 102 ).
1
The information of the originals is scanned, digitised and converted in a file.
2
The image file is transferred from the machine memory to the DAC.
3
The generated file is transmitted from the DAC to a scan server and saved in a
server directory.
The table below shows the actions to take when you stop or correct a phase.
Note:
You cannot delete the generated files that are saved on the DAC
(phase 3).
How to correct: when you make the scan job settings
How to stop: during the scanning process
When Then
You notice a incorrect setting for the
scan job Correct the scan job setting.
The scanning process of a job or job
part fails (phase 1) Stop the scanning process.
The generated files that are stored in
the machine memory are not correct
(phase 1 and 2) Delete the generated files from the
machine memory.
If you press the Correction key Then
Once The Océ VarioPrint 2050-70 restores
the default settings.
If you press the Correction key Then
Once The Océ VarioPrint 2050-70 cancels
the scan job.