Oce VarioPrint 2050-70, Job Manual

Page: 147 / 174

Safety information 147
Connection
■
Do not move the machine yourself, but contact your local Océ organisation.
■
If for some reason you have to move the machine yourself, please make sure
that the mains power point has the right fuse capacity. See the safety data
sheet in this information set for information about maximum current.
■
Do not bridge any mechanical or electrical circuit breakers.
■
It is recommended connect only those copy-control products (or other
products) which meet the (inter)national product safety and radio frequency
interference standards, and to use an attachment cable as specified by Océ.
■
Do not use an extension lead to connect the machine.
■
This machine is not designed for connection to an IT power system. An IT
power system is a voltage network in which the neutral wire is not
connected to earth.
■
For the equipment connected via a wall socket: locate the machine close to
a wall socket that is easily accessible.
■
For the equipment connected via a fixed connection to the electricity grid:
the disconnect device in the fixed connection should be easily accessible.
■
Never connect the machine to a mains voltage deviating from the value as
defined on the power-marking label. If connection to a different mains
voltage is required, contact your local Océ organisation.
■
Do not use another mains connection cable than the one supplied with the
machine. When replacement of the main connection cable is required,
because the cable is damaged or defect, contact your local Océ organisation
for a correct replacement of the mains connection cable.
Surroundings
■
Do not block the ventilation openings of the machine.
■
Ensure that the machine is placed on a level, horizontal surface of sufficient
strength. See the Océ VarioPrint 2050-70 Product safety data sheets in this
appendix for information about the weight of the equipment.
■
Ensure there is sufficient space around the machine. This facilitates
reloading materials as well as maintenance.
■
Do not place the machine in rooms which are too small or insufficiently
ventilated. See the Océ VarioPrint 2050-70 Product safety data sheets in this
appendix for information about the recommended room volume and
ventilation.