Oce VarioPrint 2050-70, Job Manual

Page: 42 / 174

42 Océ VarioPrint 2050-70 Job manual
Note:
You can enter the Key Operator mode when you open the 'Special
settings' card in the 'Extra' section. The Key Operator mode is protected and
requires a password entry.
'Copy layout' ■
The 'Margin shift' function allows you to change the
default margin settings for the front and the rear pages
from + 25 mm down to - 25 mm.
See the result of the settings in the feedback box, next to
the 'Margin shift' function box
Check that the increased margins do not result in lost image
information.
'Original
type' The icons show the orientation of the information and the
binding edge of the originals.
When you place the originals in the automatic document
feeder, the selected 'Original type' icon refers to the
information detected by the automatic document feeder.
The Océ VarioPrint 2050-70 passes the 'Original type'
binding and orientation on to the 'Copy type' settings.
When you change the 'Original type', you cancel the link
between the automatic document feeder and the 'Original
type' setting.
To restore the link, press the Correction key .
The default setting is used for a copy job on the platen.
'Image
quality' To improve the image quality, you can do the following
tasks (see ‘
Improve the image quality of a copy ’ on
page 58 ):
■
Select 'Photo', when the originals contain extensive
photos.
■
Select 'Text', when the originals are mainly text.
■
Use the 'Lighter or darker' function, to change the
brightness of the images.
Card Description