Oce VarioPrint 2050-70, Job Manual

Page: 19 / 174

Introduction 19
About the activity states of the Océ VarioPrint 2050-70
Introduction
The message box gives you the information about the current state of the Océ
VarioPrint 2050-70.
States of the machine
State Description
Machine is
switched off To switch the machine on, you must press the ON / OFF
button on the machine.
The machine needs 8 minutes to warm up.
Ready to start a
job The machine is ready to copy, ready to print or ready to
scan.
Ready to copy or
scan a next part The machine is ready to copy or scan a next job part.
The state is activated by the Combine key .
Ready to start a
job in the
Interrupt mode The machine is ready to copy, to print or to scan in the
Interrupt mode.
The state is activated by the Interrupt key
, during job
processing. The suspended job continues after the
Interrupt mode has been left.
Busy The machine is processing a job.
■
Copy job.
The first line indicates the number of completed sets.
The second line indicates the number of originals to
copy.
■
Print job.
The first line indicates the number of completed sets.
The second line indicates the name of the user.
The third line indicates the name of the file.
The fourth line indicates the number of pages in a set.
■
Scan job.
The first line indicates the number of originals.
Low power mode The machine has entered an energy save mode.
To switch from the low power mode, you can press any
key.