Oce VarioPrint 2050-70, Job Manual

Page: 51 / 174

The copy function 51
Before you begin
■
To check that your copy job settings are correct, first make a test copy. Make
sure that the settings do not result in lost image information or grey borders.
How to make an enlarged or reduced copy with the automatic document feeder
1
Place and align the originals face down in the automatic document feeder.
Follow the feed direction according to the dimensions and orientation of the
information on the originals.
2
Select the 'Copy' mode .
The 'Basic' section opens automatically.
3
Select '1-sided' or '2-sided' in the 'Original' and 'Copy' function boxes.
4
Select 'Yes' or 'No' in the 'Staple' function box.
5
Activate the 'Paper' section.
Make sure that the 'Paper input' card is open.
6
Select the size and the required paper in the 'Source' function box.
The selected size is shown in the 'Paper' section.
The enlargement or reduction is adjusted automatically and is displayed in the
'Basic' section.
[28] Select the size. The enlargement or reduction is adjusted automatically
[28] Select the size. The enlargement or reduction is adjusted automatically
7
Activate the 'Extra' section.
Open the 'Original type' card.
Keep the setting or change the original type.
8
Open the 'Copy type' card.
Keep the setting or change the copy type.
9
Select the number of copies.
10
Press the Start key .