User’s Guide Océ CS9060 printer
Chapter 3 : Installing the Unit
28
AP-75770 – Rev 1.1 -19/11/2007,
3.2.1 Connection procedure
Step 1 :
Make sure that the power key is switched OFF.
Notes
•
The power is switched ON when the [Power] key of the operation panel is pressed. In that case, press
the key once again to switch OFF the power.
Step 2 :
Plug the power cables to the AC inlet at the back of the printer.
1
2
No. Name
1 AC
inlet
Notes
•
If a power cable is damaged, contact your local Océ representative.
Notes
•
If you cannot use earth terminals nor find any of them, contact your local Océ representative.
•
Do not unplug the power cables when the printer is ON. If the power cables have been unplugged,
leave the printer for at least 1 minute before plugging the cables in again.
