User’s Guide Océ CS9060 printer
Chapter 3 : Installing the Unit
38
AP-75770 – Rev 1.1 -19/11/2007,
3.7 TRANSFER AND TRANSPORTATION
3.7.1 Transferring the printer
Caution
•
Keep the printer horizontally while transferring.
•
Do not make the main body of the printer slanting or place it in a vertical position, nor keep the
printer upside down. There is a possibility that the ink inside the printer may leak. Moreover,
normal operation after shifting to these positions cannot be guaranteed.
When using the dedicated stand, transfer the printer according to the procedure below.
(1) Pre-transfer steps
Step 1 :
Verify that the printer has been switched OFF.
Step 2 :
Verify that the butterfly bolts attaching the stand with the printer, are well fixed.
Step 3 :
Verify that the printer head is in the rightmost position.
Step 4 :
Attach the protective material (metal plate) for attaching the head unit, and fix it with
thumbscrews.
Step 5 :
Remove the scroller.
Step 6 :
Unplug and remove all cables.
Step 7 :
Release the lock of the caster wheels and transfer the printer.
Notes
•
The casters supplied with the dedicated stand are manufactured for a small transfer on a plain surface.
When moving the printer outdoors, and in places with big step differences, then move the stand and
printer separately. For further details please refer to the Installation guide.
No. Name
1 Head
unit
2 Butterfly
screw
3
Head unit fastening material (metal plate)
