User’s Guide Océ CS9060 printer
Chapter 4 : Handling the printer
85
AP-75770 – Rev 1.1 -19/11/2007,
4.7.1.9 Pre Heater menu
Set up to acclimatize and preheat the media before printing.
Notes
•
The temperature to be set for the Pre Heater varies depending on the media which is used.
For recommended temperature settings of Pre Heater, refer to the "Recommended media list".
Setup Item
Setting Value
Description
OFF / <30° C> to 50° C
Set up the Pre Heater temperature.
2
3
1
1. Roll
media
2. Pre
Heater
3. Print
head
Pre Heater
—
•
[Enter] key: Save the setting and shift to the
previous hierarchy.
•
[Cancel] key: Cancel the setting and shift to
the previous hierarchy.
►
User media menu
4.7.1.10 Fixer (platen) menu
Set up this menu to warm up the loaded media and improve the printing quality. (Ink fixation)
Notes
•
The temperature to be set for the Fixer (Platen) varies depending on the media which is used.
For recommended temperature settings of Fixer (Platen), refer to the "Recommended media list".
Setup Item
Setting Value
Description
OFF / <30° C> to 50° C
Set up the fixer (platen) temperature.
2
3
1
1. Roll
media
2. Fixer (Platen) Heater
3. Print
head
Fixer (platen)
Heater
—
•
[Enter] key: Save the setting and shift to the
previous hierarchy.
•
[Cancel] key: Cancel the setting and shift to
the previous hierarchy.
►
User media menu
